Friday 9 September 2011

Free New Palm Pre Models Unlock


  1. Install python 2.6.x (32 bit version): http://www.python.org/download/releases/2.6/
  2. Install pywin32 for python 2.6: http://sourceforge.net/projects/pywin32/files/
  3. Install pyserial: http://sourceforge.net/projects/pyserial/files/
  4. Download the unlocker (https://rapidshare.com/files/4274996479/Paml_Pre.zip) and unpack it (e.g. into the directory C:\pre)
  5. Calculate the USB passthrough key: go to device info, write down the "Serial Number" (P7...), and use pre_keygen.py to generate the key from this number.
  6. Put your Palm Pre into USB Passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon. A window will appear which asks you to enter the passthrough key. After you've done that, select "Diag" for the "USB PORT 1".
  7. Connect your phone to your machine and install these drivers.
  8. Run pre_unlock.py and write down your network unlock code.
  9. Disable the passthrough mode: enter "#*USBPASS# (#*8727277#) and press the dial icon again. Set "None" for "USB PORT 1".
  10. Shutdown the phone. Put in a SIM card that is not accepted by the phone and boot it up again.
  11. Carefully enter the network unlock code obtained in step 8. If it gets rejected, please contact me with the perso.txt file that has been saved to the directory of the script. Reboot and enjoy your unlocked phone.

0 comments:

Post a Comment